In the Ditch SP12,000 Sidepuller

In the Ditch SP12,000 Sidepuller

Integrated Wireless Controls
$22,899.05 USD
Skip to product information
In the Ditch SP12,000 Sidepuller

In the Ditch SP12,000 Sidepuller

SKU ITD4711
$22,899.05 USD
Shipping calculated at checkout.
Control Style

Order Now — Request a Quote & Lead Time

This item is built or sourced to order. Send your details and we’ll reply with a firm price and current lead time.

In the Ditch SP12,000 Sidepuller

The In the Ditch SP12,000 sidepuller gives a car carrier or rollback its own recovery capability, so you don't have to call in a wrecker for a vehicle that's off the road. It's built for 26,000–33,000 lb GVWR chassis with a 34"–40" frame height, and pulls with a 12,000 lb hydraulic winch through center and outer removable recovery boom heads.

Hydraulic stabilizer legs with a lock valve and fold-down, ground-penetrating grousers hold the truck in place while you winch.

  • Center recovery boom head
  • Outer removable recovery boom head
  • 12,000 lb hydraulic winch with tensioner plate
  • 7/16" x 100' steel core wire rope
  • Winch free spool: air-operated on Integrated units, manual handle on Non-Integrated units
  • Hydraulic stabilizer legs with lock valve and fold-down grousers
  • Light bar mounting base
  • Adjustable SP mounting base and installation hardware
  • Polished stainless steel rear panel
  • Tuff Coat gloss black finish and decal package
  • Operation manual

The unit ships on a stand. After you order, we call to confirm your options, such as the light pylon and mounting plates.

Integrated Wireless Controls: pre-wired by In the Ditch with the SP wireless receiver and an air-operated winch free spool.

Non-Integrated: plumbs into your truck's own wrecker or carrier valve body (power beyond) and uses a manual free spool handle.

Recommended chassis GVWR 26,000–33,000 lb
Frame height 34"–40"
Frame width 34"–34-3/4"
Minimum additional cab-to-axle (CA) 19"
Winch 12,000 lb hydraulic
Wire rope 7/16" x 100' steel core
Winch tensioner In the Ditch tensioner plate
Mounting hardware 5/8" and 1/2" Grade 8 bolts
Mounting position At least 2" behind the cab (In the Ditch recommends 2"–4")
Hydraulic hoses 3,000 psi minimum rating; 1/2" winch supply hoses
Electrical (Integrated) 12 V, 25 A fuse; cab switch recommended

Pull through the center sheave anywhere within a 170° range behind the unit. For side pulls, the outer boom head and a snatch block on the angle-brace anchor points give you 45° recoveries. Use a snatch block with a sheave at least 12 times the wire rope diameter (5-1/4" for 7/16" rope).

Not sure the SP12,000 is the right size? See all four In the Ditch sidepullers, from the SP8500 to the SP20,000.

Build Your Custom Sidepuller Setup

Your Configuration

Select a Sidepuller to get started
Total $0.00

Goes well with...