In the Ditch SP9000 Sidepuller
Order Now — Request a Quote & Lead Time
This item is built or sourced to order. Send your details and we’ll reply with a firm price and current lead time.
In the Ditch SP9000 Sidepuller
The In the Ditch SP9000 sidepuller gives a car carrier or rollback its own recovery capability, so you don't have to call in a wrecker for a vehicle that's off the road. It's built for 15,000–26,000 lb GVWR chassis with a 32"–36" frame height, and pulls with a 9,000 lb hydraulic winch through center and outer removable recovery boom heads.
Hydraulic stabilizer legs with a lock valve and fold-down, ground-penetrating grousers hold the truck in place while you winch.
- Center recovery boom head
- Outer removable recovery boom head
- 9,000 lb hydraulic winch with tensioner plate
- 3/8" x 100' steel core wire rope
- Winch free spool: air-operated on Integrated units, manual handle on Non-Integrated units
- Hydraulic stabilizer legs with lock valve and fold-down grousers
- Light bar mounting base
- Adjustable SP mounting base and installation hardware
- Polished stainless steel rear panel
- Tuff Coat gloss black finish and decal package
- Operation manual
The unit ships on a stand. After you order, we call to confirm your options, such as the light pylon and mounting plates.
Integrated Wireless Controls: pre-wired by In the Ditch with the SP wireless receiver and an air-operated winch free spool.
Non-Integrated: plumbs into your truck's own wrecker or carrier valve body (power beyond) and uses a manual free spool handle.
| Recommended chassis GVWR | 15,000–26,000 lb |
|---|---|
| Frame height | 32"–36" |
| Frame width | 34"–34-3/4" |
| Winch | 9,000 lb hydraulic |
| Wire rope | 3/8" x 100' steel core |
| Winch tensioner | In the Ditch tensioner plate |
| Mounting hardware | 1/2" Grade 8 bolts |
| Mounting position | At least 2" behind the cab (In the Ditch recommends 2"–4") |
| Hydraulic hoses | 3,000 psi minimum rating; 1/2" winch supply hoses |
| Electrical (Integrated) | 12 V, 25 A fuse; cab switch recommended |
Pull through the center sheave anywhere within a 170° range behind the unit. For side pulls, the outer boom head and a snatch block on the angle-brace anchor points give you 45° recoveries. Use a snatch block with a sheave at least 12 times the wire rope diameter (4-1/2" for 3/8" rope).
Not sure the SP9000 is the right size? See all four In the Ditch sidepullers, from the SP8500 to the SP20,000.