In the Ditch SP20,000 Sidepuller

In the Ditch SP20,000 Sidepuller

$37,590.00 USD
Skip to product information
In the Ditch SP20,000 Sidepuller

In the Ditch SP20,000 Sidepuller

SKU ITD4700
$37,590.00 USD
Shipping calculated at checkout.

Order Now — Request a Quote & Lead Time

This item is built or sourced to order. Send your details and we’ll reply with a firm price and current lead time.

In the Ditch SP20,000 Sidepuller

The In the Ditch SP20,000 is the largest sidepuller in the SP series. It gives a heavy car carrier its own recovery capability, so you don't have to call in a wrecker for a vehicle that's off the road. It's built for 30,000–50,000 lb GVWR chassis with a 40"–46" frame height, and pulls with a hydraulic winch through center and outer removable recovery boom heads.

Hydraulic stabilizer legs with a lock valve and fold-down, ground-penetrating grousers hold the truck in place while you winch.

  • Center recovery boom head
  • Outer removable recovery boom head
  • Hydraulic winch with Warn roller tensioner
  • Wire rope
  • Air-operated winch free spool
  • Removable D-rings
  • Aluminum hook slide tray
  • Hydraulic stabilizer legs with lock valve and fold-down grousers
  • Light bar mounting base
  • Adjustable SP mounting base and installation hardware
  • Polished stainless steel rear panel
  • Tuff Coat gloss black finish and decal package
  • Operation manual

The unit ships on a stand. After you order, we call to confirm your options, such as the light pylon and mounting plates.

Recommended chassis GVWR 30,000–50,000 lb
Frame height 40"–46"
Frame width 34"–34-3/4"
Minimum additional cab-to-axle (CA) 27"
Winch tensioner Warn roller tensioner
Winch free spool Air-operated
Mounting hardware (10) 5/8" Grade 8 bolts per side
Mounting position At least 2" behind the cab (In the Ditch recommends 2"–4")
Hydraulic hoses 3,000 psi minimum rating; 1/2" winch supply hoses

Pull through the center sheave anywhere within a 170° range behind the unit. For side pulls, the outer boom head and a snatch block on the angle-brace anchor points give you 45° recoveries. Use a snatch block with a sheave at least 12 times the wire rope diameter.

Not sure the SP20,000 is the right size? See all four In the Ditch sidepullers, from the SP8500 to the SP20,000.

Build Your Custom Sidepuller Setup

Your Configuration

Select a Sidepuller to get started
Total $0.00

Goes well with...